Trenz Electronic GmbH
SoC Module with Xilinx Zynq Z-7012S single core, 1 GByte DDR3L SDRAM, 4 x 5 cm
Xilinx Zynq XC7Z012S-1CLG485C with single core processor, 1 GByte DDR3L SDRAM, 32 MByte Flash, 1 Gbit Ethernet, 4 GTP/GTX Tranceiver
Item number VAR-827001627
Located in: Germany
Please ask for any minimum quantities.
The predecessor of this article is TE0715-04-21C33-A. All changes are in the Product Change Notification (PCN).
The Trenz Electronic TE0715-05-21C33-A is a SoC module integrating a Xilinx Zynq Z-7012S with 4 MGT Links, a Gigabit Ethernet transceiver (physical layer), 1 GByte DDR3L SDRAM, 32 MByte SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking strips.
This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq-7000 platform.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- Xilinx Zynq XC7Z012S-1CLG485C
- Rugged for shock and high vibration
- Single-Core ARM Cortex-A9 MPCore up to 766MHz
- 10/100/1000 tri-speed gigabit Ethernet transceiver (PHY) with SGMII
- MAC Address EEPROM
- USB 2.0 high-speed ULPI transceiver
- 1 GByte (32-bit) DDR3L SDRAM
- 32 MByte QSPI Flash memory (with XiP support)
- Programmable Clock Generator: Transceiver Clock (default 125 MHz)
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- 132 FPGA I/O's (65 LVDS pairs possible) and 14 PS-MIO available on board-to-board connectors
- 4 GTP/GTX Tranceivers
- On-board high-efficiency DC-DC converters
- 4.0 A x 1.0V power rail
- 3.0 A x 1.5V power rail
- Temperature compensated RTC (real-time clock)
- System management
- eFUSE bit-stream encryption
- AES bit-stream encryption
- User LED
- Evenly-spread supply pins for good signal integrity
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado ML Standard Edition (free version)
The Vivado ML Standard Edition is the FREE version of the Vivado design suite. Vivado ML Standard delivers instant access to some basic Vivado features and functionality at no cost.
Overview of all editions of Vivado MLDevelopment Support
There are different base boards available for this module.
Latest documentation, design support files and reference designs with source files are available for download free of charge.
Scope of Delivery
- 1 x TE0715-05-21C33-A Trenz Electronic 4 x 5 cm SoC module with Xilinx Zynq Z-7012S (single core processor)
- 8 x screws
- 4 x bolts
Additional Information
- Manufacturer's article number: TE0715-05-21C33-A
- Trenz Electronic TE0715 Wiki
- Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, regular 4 mm,
overview, compatibility, mating heights and speed rating: Wiki, mounted on every 4 x 5 cm module of Trenz Electronic - Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.
The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.
| Item ID | 101380 |
| Condition | New |
| Legacy item ID | 3467 |
| Model | TE0715-05-21C33-A |
| Manufacturer | Trenz Electronic GmbH |
| Manufacturing country | Germany |
| Content | 1 piece |
| Weight | 47 g |
| Net weight | 47 g |
| Customs tariff number | 84715000 |
