GWS Servo: S03TXF STD

The GWS Servo can be used for many applications. The most common use of servos is as actuators. Their ability to move with relatively high torque through a path at constant velocity makes them very useful. However, a servo’s limited rotation (~215 degrees in this case) is a barrier to some designs. There is a tradeoff to modifying a servo for continuous rotation. To allow the servo to continuously rotate, the feedback sensor must be disabled, which effectively turns the servo into a high torque, low rpm motor. The speed of the servo’s rotation is controlled with Pulse Width Modulation.

Features

• Provides 0.23 second/60 degree rotation with 47 oz-in of Torque at 4.8V
• Provides 0.18 second/60 degree rotation with 56 oz-in of Torque at 6V
• 3-pin Futaba style connector
• Includes a variety of servo horns, grommets and mounting screws.

Required Hardware

• GWS Servo
• Philips screwdriver
• Utility knife

Scope of Delivery

• 1 x GWS Servo Kit

References

• Manufacturer: Digilent Inc.
• Manufacturer's article name: GWS Servo Kit
• Manufacturer's article number: 290-010

Resources

• Product Page at Digilent Inc.
• Digilent Inc. Support Forum